The HiViz WorkShop
Click here for information about shipping to countries other than the US. |
Sound Trigger Kit, unassembled
SK2
| Click on photo to enlarge |
This kit includes all the components needed for building a sensitive sound trigger. The SK2 uses a piezoelectric element that is sensitive to sharp sounds like claps, snaps, and bursts. It can trigger on a finger snap from a distance of about 10 feet. A photo of the trigger assembled on a breadboard is shown to the right.
Additional requirements:
-
A 9-V battery or AC/DC Adapter is required to power the circuit.
-
A cord is required to trigger a flash unit. Click here for trigger cord options.
-
In order to trigger a camera, see the Camera Opto-Switch or this DIY method.
When purchasing the kit with a breadboard, there is a $1.00 savings over buying a kit and breadboard separately.
If you're also purchasing an Electronic Delay Kit (DU), there is a $1.00 savings over buying the two kits individually. In that case, go to this page to order.
You can purchase this kit assembled.
Click here for more information or below to order.










