The HiViz WorkShop
Click here for information about shipping to countries other than the US. |
Parts for PCB mounting
Click on any image for a larger view.
8-pin socket The socket can be soldered to a PC board to provide a mount for either the 555 timer or the 4-pin optocoupler. |
 |
14-pin socket The socket can be soldered to a PC board to provide a mount for either the 556 timer. |
 |
SPDT switch, PC mount This single-pole, double-throw switch has pins for mounting on a PC board. We use it on the Multi-Trigger PCB. |
 |
RCA jack, PC mount This RCA jack has pins for mounting on a PC board. We use it on the Multi-Trigger PCB. |
 |
PC board This board is used in our Camera Opto-Switches. The board is designed for mounting and connecting to ICs. The copper-plated side is shown. |
 |
Potentiometers (breadboard or PC mount)
| 1-kilohm potentiometer This pot is used for sensitivity control for the SK2 sound trigger. |
 |
2.5-kilohm potentiometer |
 |
| 10-kilohm potentiometer This pot is used for sensitivity control for the SPG Schmitt trigger photogate. |
 |
| 100-kilohm potentiometer This pot is used for sensitivity control for the TPG transistor photogate and LAT light-actuated trigger. The 100k pot may also be connected in series with a 1-megohm pot (1MP) in a delay unit in order to provide fine control of the time delay. |
 |
| 1-megohm single-turn potentiometer This pot is used to adjust time delay for the DU delay unit. |
 |
