The HiViz WorkShop
VPC. Vivitar PC-1 Synch Cord (straight)
| This 1-foot long, straight PC cable connects at one end to a Vivitar 283 or 285HV flash unit. The other end normally connects to a camera's sync jack. However, you can snip off that end and splice the cable to the conductor cable that comes with our trigger kits. The other end of the 2-conductor cable would connect to the output of the trigger.
Note: This cord is not for the Vivitar DF 283 flash. |
Click image to enlarge |
VPCQ. Quick Disconnect Vivitar PC-1 Synch Cord
If you would like us to prepare the cable for you so that
when you receive it, you simply need to connect the cable
to your flash unit on one end and to your trigger circuit
on the other, select the Quick Disconnect PC-1 Cord. We'll
prepare an RCA-style quick disconnect plug and jack to connect
the adapter to your circuit board. We'll also put an RCA
jack on the PC half of the cut cord so that you can restore
the PC-1 to its original use whenever you wish.
Note: If you prefer to go the DIY route and prepare your own quick disconnect cable, we have RCA plugs and jacks available on the Parts for Projects page.
PC-1 connected to 2-conductor cable via RCA quick disconnects
PC-1 cord restored to original function
