information and inspiration
for students, teachers and hobbyists
About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn  flickr

 

The HiViz.com WorkShop

 


Prices reduced by 20% - 33% on most trigger kits and modular system kits!


 

See updated products here.

 

PC Cords for Breadboard Circuits

 

Use the cable options below to connect the output of a breadboard circuit to a flash unit having a PC jack such as the one shown to the right.

 

We have both assembled and unassembled options.


Click image to enlarge

 

PC Cord Adapter, unassembled (PC)

Select this kit If you want to save money and do your own splicing of the PC plug to a 2-conductor cable that you already have. (Our breadboard kits are supplied with 3 feet of 2-conductor cable.) We'll send you what amounts to half of a standard PC cord shown to the right. One end will be the PC plug end shown above and the other will be just the cut end of the cord. (total length about 6") This is significantly less expensive than buying a complete PC cord at a photo store. We'll also include lengths of heat-shrink tubing that you can use in following the assembly instructions here.

Click image to enlarge

PC Cord Adapter, assembled (PC-A)

Don't want to mess around with splicing wires and soldering? We'll assemble a 3-ft cord for you. There will be a PC plug on one end and bare wires on the other end to connect to a breadboard circuit.

 

PC cord for breadboard circuit

Click image to enlarge


About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn flickr
 
 
copyright © 1995-2018 HiViz.com