The HiViz.com WorkShop
PCB for Multi-Trigger Kit, unassembled
The PC board for the Multi-Trigger provides an alternative to using a breadboard. While a breadboard is the most flexible approach to wiring the circuit, with a PCB you hardwire the components and thereby achieve greater durability. The completed PC board is shown to the right (click for larger image). The dimensions of the PC board are 3.00 x 4.25 in. (7.60 x 10.85 cm).
The connector for your flash (or camera) is not included, since that will vary depending on your equipment. See information here about connection methods.
The MTPCB2 kit includes all the parts you need to build the Multi-Trigger circuit on the PC board as well as the photogate and battery cables. Assembly is required. In order to assemble the kit, you'll need soldering tools. A recommended list together with all supplied parts and illustrated assembly instructions are provided here. We recommend that you have previous experience soldering on PC boards.