information and inspiration
for students, teachers and hobbyists
About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn  flickr

 

The HiViz.com WorkShop

 

Multi-Trigger with PCB and Enclosure Kit

MTE-PCB

discontinued

A new version of this kit is available. See the Multi-Trigger 2.

 

PCB for Multi-TriggerThe Multi-Trigger with PCB and Enclosure Kit incorporates our Multi-Trigger board (shown to the right) with a project box enclosure. (shown below)

 

(If you're interested in the PCB and parts but not the enclosure, go here.)

 

MTE-PCB control box

Assembly is required.

The photo above shows the completed assembly.

 

The kit includes all the parts you need to build the Multi-Trigger PCB and enclose it in a project box. The connector for your flash (or camera) is not included, since that will vary depending on your equipment. See information here about connection methods. If you plan to trigger a camera shutter, you'll also need the Camera Opto-Switch and shutter cable for your camera.

 

To assemble the kit, you'll need soldering tools. See the assembly instructions. We recommend that you have previous experience soldering on PC boards.


About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn flickr
 
 
copyright © 1995-2018 HiViz.com