The HiViz WorkShop
Multi-Trigger with PCB and Enclosure Kit
MTE-PCB, unassembled
A new version of this kit is available. See the Multi-Trigger 2. The MTE-PCB below is still available.
The Multi-Trigger with PCB and Enclosure Kit incorporates our new Multi-Trigger board (shown to the right) with a redesigned project box enclosure. (shown below) Click on the images for larger views. See more photos and information here.
(If you're interested in the PCB and parts but not the enclosure, go here.)
Assembly by the customer is required.
The photo above shows the completed assembly.
The kit includes all the parts you need to build the Multi-Trigger PCB and enclose it in a project box. The connector for your flash (or camera) is not included, since that will vary depending on your equipment. See information here about connection methods. If you plan to trigger a camera shutter, you'll also need the Camera Opto-Switch and shutter cable for your camera.
To assemble the kit, you'll need soldering tools. See the assembly instructions. We recommend that you have previous experience soldering on PC boards.
If you would like to have this unit assembled for you, click here for pricing.
Accessories for the Multi-Trigger
The AC/DC adapter provides a substitute for a 9V battery to power the Multi-Trigger. The adapter accepts 100-240V input voltage at 50-60 Hz; output is a regulated 9 volts. The power rating is 10 W.
The cable adapters below are helpful for converting from RCA to 3.5mm connectors and vice versa.
Lengths of cable can be purchased separately.
