The HiViz WorkShop
Click here for information about shipping to countries other than the US.
Multi-Trigger 2, assembled
Information about the Multi-Trigger 2 is provided here. You may order an assembled unit online below. International customers, please select Express shipping on checkout. Before ordering, contact us for when to expect shipment. Two to four weeks may be required to complete assembly, depending on how many assemblies are in the cue.
Multi-Trigger 2, assembled (MT2-A) - $275.00
- enclosure with sound, photogate, and delay circuits
- microphone cable
- two types of photogate cables
- external trigger cable
If you would like to have an assembled Multi-Trigger 2 with the extended output strip added to the assembly, select the MT2x-A below This provides 4 additional outputs. Two of the outputs are instant and two are delayed. For each pair of additional instant and delayed outputs, one is a switch output and the other is a low-voltage (~7.5 V) pulse output. The latter can be used to trigger strobes that require a trigger voltage.
Multi-Trigger 2 with extended outputs, assembled (MT2x-A) - $310.00
What else is needed
- In order to trigger a camera shutter, you need a shutter cable.
- In order to trigger a flash unit, you need a flash trigger cable.
Camera shutter cables
See the list of compatible cameras here.
This is a 6-ft long straight cable with a 2.5mm plug on each end. The included 2.5mm to 3.5mm adapter makes the cord usable with HiViz enclosures projects.
DIY shutter cable If you want to use a shutter release cable that you already own rather than buying one of ours, you can just get the connectors shown here and follow these instructions.
The following flash trigger cable kits include a connector for the flash, a 3.5mm plug, 3-ft of 2-conductor cable, and heat-shrink tubing. Both kit and assembled versions are available.
The AC/DC adapter is an optional accessory.