information and inspiration
for students, teachers and hobbyists
About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn  flickr

 

Assembly and Operating Instructions for HiViz.com Kits

 

For best results in viewing images, we recommend using the Firefox browser.

 

Parts for the Photo Gate 2i Kit (PG2i)

 

Assembly instructions for other kits

 

Below is a list of the parts supplied with the Photo Gate 2i kit. Click on the photos for larger images.

 

We may occasionally make changes to the parts list without notice in order to improve the product.

 

Name/Description Quantity

Photo

Notes
PC board 1 PCB  
470 Ω resistor 3

470-ohm resistor

(yellow-violet-brown)

 
0.01-uf capacitor 1

0.01-uf capacitor

103M

10-kΩ potentiometer 1 10k pot  

 

Silicon-controlled rectifier

(EC103D)

1 EC103D SCR

SCR pins

C = cathode (-)

G = gate

A = anode (+)

LM555 Timer

1 555 timer

555 timer pins

Note the location of pin 1

relative to the notch on the IC.

8-pin socket

1

8-pin socket  
Interrupter 1 Interrupter  
Red LED 1 red LED  
LED holder 1 LED holder  
RCA jack 1 RCA panel jack  
Toggle switch 1 SPDT switch (red)  

9-V battery holder

 

1 laydown battery holder (includes hook and loop tape
Small project box 1 project box  

Printed label for the lid

 

1 lid label

includes 2 laminating sheets

for front and back

Drilling template for lid 1 lid label  
Lengths of various colors of hook up wire are also included.

 

 

 

 


About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn flickr
 
 
copyright © 1995-2018 HiViz.com