Assembly and Operating Instructions for HiViz Kits
Connecting linear taper potentiometers to breadboarded circuits (v10)
The legs of the linear
taper potentiometer are numbered 1-3 in the diagram
to the left. The view is looking down on the potentiometer
with the rotator shaft pointing toward you.
The coordinates for the connection of each leg to the breadboard are given below. Refer to the linked photo to view the breadboard circuit of interest.
Before connecting the linear taper pot to the breadboard, the pot to be replaced must be removed from the breadboard. |
| Kit (v10) |
Pot to be replaced |
Connections |
| (for all combination circuits |
1M
|
Leg 1 of the linear pot connects to 19J. Leg 2 of the linear pot connects to the red 9-V column. |
100k  |
Leg 1 of the linear pot connects to 14I. Leg 2 of the linear pot connects to the blue column adjacent to the red 9-V column. |
|
| 1k
|
Leg 1 of the linear pot connects to 7F. Leg 2 of the linear pot connects to 8F. |
|
| 10k
|
Leg 1 of the linear pot connects to 9G. Leg 2 of the linear pot connects to 10G. |
|
| 100k
|
Leg 1 of the linear pot connects to 4J. Leg 2 of the linear pot connects to the red 9-V column. |
|
10k  |
Leg 1 of the linear pot connects to 8J. Leg 2 of the linear pot connects to the red 9-V column. |
|
| 100k |
Leg 1 of the linear pot connects to 4I. Leg 2 of the linear pot connects to the blue column adjacent to the red 9-V column. |
|
| 100k
|
Leg 1 of the linear pot connects to 9J. Leg 2 of the linear pot connects to the red 9-V column. |
|
| MT | 1M  |
Leg 1 of the linear pot connects to 14J. Leg 2 of the linear pot connects to the red 9-V column. |
| 100k |
Leg 1 of the linear pot connects to 10I. Leg 2 of the linear pot connects to the blue column adjacent to the red 9-V column. |
|
1k  |
Leg 1 of the linear pot connects to 28F. Leg 2 of the linear pot connects to 29J. |
|
| 10k |
Leg 2 of the linear pot connects to the blue (-) column. Leg 3 of the linear pot connects to 6A. |
Assembly instructions for other kits