information and inspiration
for students, teachers and hobbyists
About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn  flickr

 

Assembly and Operating Instructions for HiViz.com Kits

 

For best results in viewing images, we recommend using the Firefox browser.

 

 

Mount for an Interrupter

 

Click here for complete instructions on preparing an interrupter cable for the Multi-Trigger 2. The information below applies only to a method mounting the completed cable assembly.

Mounting the interrupter

A PC board provides a convenient way to securely mount the interrupter cable assembly. The 4 holes on the corners of the board can be used for this purpose. Photo 1 shows just one way to do this. The PC board is mounted to the outside of a small plastic project box using 4 3/4-inch standoffs and 4-40 bolts. A hole drilled in the lid and the side of the box provides a pass through for the cable. The cable is tied in an overhand knot inside the box to provide strain relief. A bolt through the back of the box can be used for mounting to a support.

Mounting the interrupter

 

This photo shows the side view of the assembly.

 

 


About Tools Products Activities Galleries Projects FAQ Links Contact Facebook LinkedIn flickr
 
 
copyright © 1995-2018 HiViz.com