HiViz - Kits - Resistors

The HiViz WorkShop

Resistors and Potentiometers

Fixed-value
Potentiometers (PC or breadboard mount)

For panel-mount linear taper potentiometers, see this page.

Click on any image for a larger view. (Pop-ups must be enabled.)

Fixed value (1/4 W)

All fixed-value resistors are $0.07 each.

Example
(1000 ohm resistor)

Potentiometers (breadboard or PC mount)

1-kilohm potentiometer This pot is used for sensitivity control for the SK2 sound trigger. 1KP - $0.75
2.5-kilohm potentiometer This pot is used for sound trigger sensitivity control on our PCB Multi-Trigger. The 2.5k pot provides a wider sensitivity range than the 1k pot above. The range extends to lower sensitivity rather than higher. 2.5KP - $0.75
5-kilohm potentiometer This pot provides an even wider sensitivity range than the 2.5-kΩ pot above. 5KP - $0.75
10-kilohm potentiometer This pot is used for sensitivity control for the SPG Schmitt trigger photogate. 10KP - $0.75
100-kilohm potentiometer This pot is used for sensitivity control for the TPG transistor photogate and LAT light-actuated trigger. The 100k pot may also be connected in series with a 1-megohm pot (1MP) in a delay unit in order to provide fine control of the time delay. 100KP - $0.75
1-megohm single-turn potentiometer This pot is used to adjust time delay for the DU delay unit. 1MP - $0.75