The HiViz WorkShop

 

Click here for information about shipping to countries other than the US.

 

Cable and Wire

 

Three-foot lengths of 2-conductor cable are provided in all of the trigger kits for connecting the circuit to a flash unit.  Three-foot lengths of 3-conductor cable are provided in all the photogate trigger kits for connecting the trigger circuit to the emitter-detector pair. Hookup wire is also provided in the kits. You can purchase longer or additional lengths of cable and hookup wire here. Get the amount of wire or cable that you need without having to purchase a complete spool.

 

Multi-conductor cable

Hook up wire

Heat-shrink tubing

 

Click on any image for a larger view. (Pop-ups must be enabled.)

 

Multi-conductor cables

 

2CA-3  2-conductor cable - 3 ft - $1.40

2CA-6  2-conductor cable - 6 ft - $2.80

2CA-12  2-conductor cable - 12 ft - $5.60

 

3CA-3  3-conductor cable - 3 ft - $2.15

3CA-6  3-conductor cable - 6 ft - $4.30

3CA-12  3-conductor cable - 12 ft - $8.60

 

Hook up wire

6" hookup wire 6-inches each of black, red, white, yellow, blue, and green solid 22AWG insulated wire

HW6 - $0.32

 

12" hookup wire 12-inches each of black, red, white, yellow, blue, and green solid 22AWG insulated wire

HW12 - $0.64

 

Heat-shrink tubing

This tubing is used as insulation for wires. Slip a section of the tubing over a wire splice and then heat the tubing gently with the flame of a lighter to shrink the tubing tightly onto the splice.

 

3/32" diameter heat-shrink tubing

HST332 - $0.30 (1-foot length)

 

3/16" diameter heat-shrink tubing

HST316 - $0.48 (1-foot length)